T: 01793 422 040

T: 01793 422 040

E: sales@draindepot.co.uk

100mm Stainless Steel Ratwall & Extension Pole

£97.00 Ex VAT £116.40 Inc VAT

Carriage is charged on each order. It is charged  per order not per product and varies between £7 and £16 dependent on the size & weight of the product (exc highlands). This item will be delivered within 2 working days if ordered before 2.30pm, more details

1 Returns are free, you just have to get it back to us, more details

Product Description

Product Description

Stainless Steel Ratwall and extension pole, fits easily and securely within 110mm PVC or 100mm clay drainage chamber outlets, effectively stopping rats and rodents from entering a property. Ratwall features an external hinge and curved flap so there is no restriction of flow within the pipe. It is easily fitted by mechanical compression of the side walls allowing the unit to 'friction fit' from ground level with included extension pole or by hand in a shallow chamber. The flap can be re configured to fit within any inlet of a chamber and no silicone or securing cable are required for installation


eKomi Product Feedback

Currently we have no reviews available for this product.


Currently we have no content available for this product.


RATWALL – Instructions for use

Insert the Ratwall device in the manhole chamber outlet.  By protecting the chamber outlet, a single Ratwall device will protect all upstream drainage as Ratwall stops Rats from travelling upstream and entering a property via a toilet, but does allow them to travel downstream.


Installation with Pole

Holding Ratwall in one hand, gently compress the diameter by hand while screwing the installation pole onto the large thread.  Screw the installation pole down so that the brace is almost touching the stop.

Holding the installation pole, Ratwall may now be lowered into position within the manhole chamber.  Using the pole to push Ratwall into the chamber outlet, begin by inserting at a slight angle to the pipe and gently move the device from side to side while pushing it into the pipe.  Insert Ratwall fully, until the stop touches the chamber wall.

With Ratwall in place unscrew and remove the Installation Pole.

The Ratwall is a robust Stainless Steel device and is held securely in position by a tight friction fit.

With Ratwall in place, test and ensure the flap is free to move and that it opens in the direction of flow.

Have a well-deserved cuppa, safe in the knowledge that the drain is now protected.


Installation without Pole

The Ratwall device may be installed without the use of the installation pole.  To do so an M10 nut (supplied) should be used to compress the diameter of the device and then the device should be pushed fully into the chamber outlet, before the nut is fully loosened. 

Alternatively Ratwall may be inserted by compressing the diameter by hand before locating in the chamber outlet.


Ratwall can be simply removed and re-installed for drain cleaning and maintenance purposes using the Installation Pole.

Click here to play video

Please wait while we add your product...

Proceed to Checkout

Please enter your details, so we can send your free guide

Please wait while we add your product...

Proceed to Checkout

Please enter your details, so we can send your free guide