Product Description
Product Description
Ever needed to connect a pipe that has been cut off at the surface??
Now you can - the Flexseal ICON push-fit coupling allows the connection of pipes on the interior of the pipe where external couplings may not be possible. Flexseal ICON internal push-fit couplers solves problems like partially buried pipes, pipes that are sheared too close to a surface, or pipes that have concrete flat bottoms.
A secure, watertight and permanent connection will be made that can be fit without any tools in around 30 seconds. This internal coupling passes pressure tests and it can be used on any pipe material with an internal dimension between 99mm to 103mm. The Icon couplers is also perfect for any temporary applications since this product can be removed and then re-used elsewhere with no issues.
• Significantly reduces labour time for connecting problem pipes
• Watertight connection on any pipe material
• Connects pipes of differing or irregular outside diameters
• No need to expose external surface of pipe
• Pipe stop indicates that the product is properly installed, when it is flush to the pipe end
• Passes pressure tests
• Provides shear load protection
• The whole range conforms to the requirements of BS EN 295-4:2013
Reviews
FAQs
Installation
(1) Clean the internal surface of the pipe from slurry and debris
(2) Lubricate inside of pipes
(3) Push the Icon Coupler into pipe up to the products pipe stop
(4) Push pipe 2 onto the opposite end of the Icon Coupler
Related Products
Please wait while we add your product...
Please wait while we add your product...
Currently we have no reviews available for this product.